* Add minimal uv_python module
uv_python module: add integration tests
* uv_python module: handle absent state
uv_python module: add integration tests
* uv_python module: restrict accepted version formats to X.Y and X.Y.Z
uv_python module: add integration tests for version format
* uv_python module: add _list_python and _get_latest_patch_release methods
* uv_python module: add support for latest state
uv_python module: add integration tests for latest state
* uv_python module: add integration tests for check mode
* uv_python module: improve latest state check mode to show version that will be installed
* uv_python module: make latest state more deterministic by using install with explicite version
* uv_python module: improve absent state check mode and add corresponding integration test
* uv_python module: update latest state handling to sort versions without relying on uv behavior
uv_python module: improve integration tests
uv_python module: improve module return values
* uv_python module: add integration test for when uv executable does not exist
uv_python module: improve exception handling
* uv_python module: add integration test for case when specified version does not exist
* uv_python module: handle case when provided python version does not exist in latest state
uv_python module: improve methods' return values and add docstrings
uv_python module: improve integration tests
* uv_python module: improve check mode for present state to fail when no patch version is available
* uv_python module: return commands' stderr and return code as a variable of stdout
* uv_python module: add python version to module return values for present state
* uv_python module: add python version to module return values for absent state
* uv_python module: add python version to module return values for latest state
uv_python module: fix integration tests
* uv_python module: add installation paths to return values for present state
* uv_python module: add installation paths to return values for absent state
* uv_python module: add installation paths to return values for latest state
* uv_python module: update present, absent and latest state to only include versions managed by uv in return values
uv_python module: improve integration tests
uv_python module: update module documentation
* uv_python module: use LooseVersion instead of StrictVersion to allow specifying threaded and major python versions
* uv_python module: fail module if used uv version is less than the minimal supported version
uv_python module: update documentation
* uv_python module: add uv command options to executed commands to disable unneeded features
* uv_python module: use packaging.version to only accept canonical python versions
uv_python module: update integration tests
uv_python module: improve error messages
* uv_python module: pin uv version used in tests
Improve module documentation
Co-authored-by: Felix Fontein <felix@fontein.de>
Add integration tests' aliases file for uv_python module
* Use StrictVersion instead of packaging Version
* make integration tests more deterministic
Update attributes field in documentation
Save uv bin path in an attribute
Add another example in documentation
Apply PR feedback and refactor code
Fix typing to be compatible with python versions <= 3.8
Update example to use quotes for major.minor example and update documentation
Update test aliases
Use documentation fragment for uv_python attributes
* Add aliases to skip running tests on freebsd and rhel
Make uv_python tests more deterministic
Clean uv_python documentation
* Handle case when version given is an empty string in uv_python module
* Apply linguistic guidelines for plugins/modules/uv_python.py
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Add Python version requirement in uv_python documentation
* Update tests to install uv using pip and fix some tests
Add typing to plugins/modules/uv_python.py
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Update plugins/modules/uv_python.py documentation
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Add task to uv_python tests to add uv installation directory to PATH
* Update uv_python to log unparsed versions in debug mode
Refactor uv_python code
Remove uv python label in .github/BOTMETA.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Add typing to plugins/modules/uv_python.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Fix uv python documentation
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Allow testing using Python versions lower or equal to 3.8
skip running ci tests in macos
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make uv version check more resilient to cli output format change in uv_python module
Improve tests/integration/targets/uv_python/tasks/main.yaml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
fix mypy union attr error
* update uv_python tests to run on rhel and freebsd
Update uv_python tests to use generic packge manager to install uv
Install uv with curl for freebsd in uv python tests
Install rust needed by uv in freebsd for uv python tests
Update up_python tests to fix uv installation path in RHEL
skip testing uv_python on freebsd as it only has tier 3 support by uv
Fix fragment name in uv_python.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update version_added in plugins/modules/uv_python.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update tests/integration/targets/uv_python/tasks/main.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Make version shown on debug message more precise in uv_python module
* Handle case when uv python returns relative paths instead of absolute in uv_python module
Add more typing to uv_python module
* uv_python module: update debug message fo unsupported versions to be more clear
---------
Co-authored-by: Mariam Ahhttouche <mariam.ahhttouche@etu.univ-grenoble-alpes.fr>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat: Custom telegram api host
* fix: default param telegram api host
* fix: default api_host for DOCUMENTATION
* fix: Documentation and example
* changelog: add bugfix fragment for telegram api_host
* fix: use [] for module.params access
* apk: document non-interactive mode requirement
* apk: fix file path markup in documentation
Change file path markup from E() to C() in the notes section.
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat(snap): support snap system configuration via name=system
Treat `system` as a virtual snap that is always considered installed,
bypassing snap info lookup and install/refresh logic, while still
allowing snap set/get operations via the options parameter.
Fixes#11266
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* docs(snap): note version_added for system support; add changelog fragment
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* gitlab_user: update SSH keys when key material changes
Compare SSH keys by key type and key material so comment-only differences remain idempotent while changed keys are replaced. Add unit and integration coverage for SSH key updates.
Fixes#6516
* gitlab_user: add SSH key update modes
Restore backward-compatible same-name SSH key handling by default and
add explicit update and deduplicate modes for controlled replacement
behavior.
Refs: #6516
* Apply suggestions from code review
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
---------
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* fix(bundler): replace deprecated CLI flags with BUNDLE_* env vars
Bundler 2.1 deprecated --deployment, --without, --path, --clean, and
--binstubs; Bundler 4 has removed --clean entirely. Pass these options
as BUNDLE_* environment variables instead, which have been supported
since Bundler 1.0.0 and are scoped to the process (no persistent
.bundle/config written).
Fixes#4583, fixes#11380
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(bundler): add changelog fragment for PR #12024
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(datadog_downtime): convert uuid field to str for datadog-api-client>=2.28.0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* changelog: add fragment for PR 12019
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(xml): populate matches when print_match is set, fix returned doc
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test(xml): add integration tests for print_match
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* changelog: add fragment for PR 12013
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(pam_limits): only create backup when file is actually changed
Fixes#12011
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* changelog: add fragment for PR 12014
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* Fix gitlab_hook: only pass releases_events to API when specified
The releases_events parameter now only gets passed to the GitLab API:
- On create: always passed (fixes 500 error when not specified)
- On update: only passed when explicitly specified by user
This avoids forcing the releases_events value during updates when not
intended by the user.
Fixes: https://github.com/ansible-collections/community.general/issues/11269
* Add changelog fragment for gitlab_hook releases_events fix
Fixes: https://github.com/ansible-collections/community.general/issues/11269
* Add PR link to changelog fragment
* Use .get() for safer dict access in releases_events handling
* Update plugins/modules/gitlab_hook.py
remove `.get()`
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/gitlab_hook.py
Remove the null check for `options[“releases_events”]`
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Charles Chia <charleschia@email.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fixes and improvements for better undestanding of the module
- Fixed token generation syntax to use `name` instead of `id`.
- Changed `token: {{ token }}` to `token: {{ token_result.token }}` to show accessing token from the registered variable, essentially making the entire Example section a playbook capable of full execution.
- Added notes in the Example section about the intended approach for storing and accessing tokens.
- Mentioned about not using `id` for token generation in the parameter's description.
* Applying FQCN for the `ansible.builtin.copy` module
Co-authored-by: Felix Fontein <felix@fontein.de>
* Shortened the notes about storing and accessing Jenkins token.
* Added line breaks to reduce width of the shortened notes
- Added line breaks to reduce the width of the shortened note from commit #5bc225b.
- Numbered and indented the notes for clear distinction.
* Changed token storage example to use INI instead of CSV format
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* refactor(nomad): extract common connection logic into _nomad module_utils
Fixes#7688
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* changelog: add fragment for PR 11957
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* refactor(nomad): use direct param access instead of params.get()
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(nomad): fix mypy errors in _nomad module utils
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(iso_create): add bootable ISO support via El Torito boot_options
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(changelogs): add fragment for iso_create bootable ISO support #11991
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Update plugins/modules/iso_create.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add support for AddressFamily parameter in ssh_config.
* Added changelog fragment.
* Update changelog fragment with PR link placeholder
* Fixed formatting.
* Fixed format of changelog fragment.
* Add PR number to changelog fragment.
* Incorporated review findings.
* Typo fix.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Limit to allowed values.
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix(ldap_attrs): case-insensitive attribute lookup in _get_all_values_of
LDAP attribute names are case-insensitive (RFC 4512), but the previous
code used a case-sensitive dict lookup on the server's response. When
the server returns an attribute with different casing than requested,
the lookup returns [] causing state=exact to issue MOD_ADD instead of
MOD_REPLACE, which fails on single-valued attributes that already have
a value.
Fixes#1624
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(changelogs): add fragment for ldap_attrs fix#11990
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(seport): handle port overlap with existing ranges
Fixes idempotency when a requested port is already covered by an
existing range registered for the same setype/proto. Also improves
the error message when libsemanage raises FileNotFoundError on a
port overlap validation failure.
Fixes#10105
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(seport): add changelog fragment for #11994
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(cobbler_system): handle missing interface device on existing system
When adding a new interface to an existing Cobbler system that does not
yet have that interface defined, the module raised a KeyError. Use .get()
with a fallback empty dict to safely handle that case. Also add a
continue after the unknown-property warning to prevent a secondary
KeyError on IFPROPS_MAPPING lookup.
Fixes: #7007
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(cobbler_system): add changelog fragment for #11995
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* test(yarn): add Alpine Linux support via apk
Install nodejs and yarn via apk on Alpine, sharing the functional
test block with the existing non-Alpine (pre-built binary) path.
Extracts the test block into tests.yml to avoid duplication.
Fixes#4270
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(yarn): skip Node.js runtime warnings in stderr processing
Node.js 24 emits DeprecationWarning lines to stderr (e.g. for url.parse())
that are not JSON, causing _process_yarn_error to fail with "Unexpected
stderr output from Yarn". Skip lines starting with "(node:" before
attempting JSON parsing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test(yarn): add changelog fragment for #11943
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(yarn): only JSON-parse lines starting with '{' in stderr
Node.js 24 emits multi-line DeprecationWarnings to stderr (e.g. the hint
line "(Use `node --trace-deprecation ...`") that are not JSON and were
tripping the "Unexpected stderr output from Yarn" failure. Yarn's
structured output always starts with '{', so skip any line that doesn't.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test(yarn): install sqlite on Alpine to fix nodejs 22 symbol error
On Alpine 3.21 nodejs 22 requires SQLite session extension symbols
(sqlite3session_*) that are not present in sqlite-libs; installing
the full sqlite package provides them.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test(yarn): refresh apk cache and upgrade sqlite-libs before installing nodejs
The CI Alpine container may have a stale sqlite-libs that lacks the
session extension symbols (sqlite3session_*) required by nodejs 22+.
Force a cache refresh and upgrade sqlite-libs to the latest revision.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(yarn): warn on non-JSON stderr lines instead of silently skipping
Non-JSON lines in stderr (e.g. Node.js runtime DeprecationWarnings) are
surfaced to the user via module.warn() rather than being silently ignored,
since their content and meaning are not known in advance.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* prefix yarn output line
* Update changelogs/fragments/11943-yarn-nodejs-runtime-warnings.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix(xml): coerce boolean values to string with a warning
Fixes#7171
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test(xml): add integration tests for boolean value handling
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* changelog: add fragment for PR 11959
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* adjustments from review
* test(xml): update boolean-value integration tests to expect failure
Now that xml fails on non-string values, replace the old success-path
tests with failure assertions and add a positive test for quoted strings.
Remove the no-longer-needed result XML fixtures.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* adjustments from review
* fix(xml): correct boolean test assertions to match actual error message format
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(datadog_monitor): deprecate mute and unmute states
The Datadog mute/unmute monitor API is deprecated upstream, and the
module's silenced parameter was never correctly wired to the mute
endpoint. Direct users to community.general.datadog_downtime instead.
Planned removal in 15.0.0.
Fixes#1535
* feat(datadog_monitor): add changelog fragment for #11988
* multiple module utils: flatten directories
* adjust pritunl tests
* adjust lxca and keycloak tests
* adjust botmeta
* rename test files correctly
* and an import fix
* rename pritunl api mod utils test
* fix typo in test filename
* rename references to pritunl api test
* rename keycloak mod utils test
* gem - fix --user-install conflict with OS-injected --install-dir
Some distributions (e.g. Fedora) inject --install-dir via operating_system.rb
as a platform default. Combining that with --user-install causes a gem CLI
parser error. Resolve the user install directory at install time and pass
--install-dir instead, which is semantically equivalent and avoids the conflict.
Uninstall is intentionally left unscoped so gem can find gems regardless of
where they were originally installed.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* gem - add changelog fragment for #11873
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* gem - fix user_install handling for install and uninstall
Two issues found in CI:
1. `gem environment user_gemhome` is not supported on older RubyGems (e.g.
Ubuntu 20.04 ships 3.1.2). Simplify get_user_install_dir() to always parse
the full `gem environment` output for "USER INSTALLATION DIRECTORY", which
is stable across all supported versions.
2. On Fedora, `gem uninstall` without flags only searches the system gem path
(set by operating_system.rb), so it cannot find gems installed to the user
dir via --install-dir. Add user_install to the uninstall args_order so that
gem uninstall --user-install is passed when user_install=True. The OS
defaults conflict only applies to gem install, not gem uninstall.
The integration test is updated to be consistent: the user_install:false
install/remove block now also specifies user_install:false on removal.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* gem - use --install-dir for both install and uninstall of user gems
gem uninstall --user-install does not reliably find gems on Fedora/RHEL when
running as root, because those systems may disable user gem home for root and
Gem.user_dir may differ from the path resolved via 'gem environment'.
Use --install-dir <user_dir> for uninstall as well, since that is the exact
path used during install, making the operation consistent across platforms.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* gem - add override_platform_install_dir option and type hints
- add type hints to all functions
- fix misleading comment about --install-dir scoping for uninstall
- add override_platform_install_dir option (default=false) to opt in to
resolving and passing the user gem dir explicitly to both gem install
and gem uninstall, working around OS-injected platform defaults on
distributions such as Fedora
- reclassify changelog fragment as minor_changes (new parameter, not
backport-eligible)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test(gem): add integration test for override_platform_install_dir
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test(gem): skip default user_install test on RedHat family
OS-injected --install-dir on RHEL/Fedora makes the default user_install: true
case fail. The override_platform_install_dir block already covers the correct
path on those platforms.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* fix(ipa_group): skip group_mod when external flag matches IPA state
When external=false (the default), get_group_diff() left the external
key in the diff even though the group was already non-external, causing
a spurious group_mod call that IPA rejected with "no modifications to
be performed". The fix checks equality in both directions.
Fixes#5061
* fix(ipa_group): add changelog fragment for PR 11933
* add quoting to fragment
* fix(odbc): fetch rows before committing to fix HY010 function sequence error
Fixes#5395
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(odbc): add changelog fragment for PR #11972
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(apt_rpm): do not fail when update-kernel finds no new kernel
update-kernel exits with rc=1 when the kernel is already at the latest
version. Handle this case gracefully by checking for the known
"There are no available kernels" message in stderr and returning
changed=False instead of raising an error.
Fixes#10055
* fix(apt_rpm): add changelog fragment for #11949
* Apply suggestion from review
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat(snap): add devmode parameter to support --devmode flag
Closes#8155
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(changelog): add fragment for PR 11952
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(logstash_plugin): use env vars for proxy, expose stderr on failure
Replace broken -DproxyHost/-DproxyPort JVM flags with http_proxy/https_proxy
environment variables, which are respected by modern Logstash bundled JDK.
Also include stderr in fail_json so the actual error output is visible.
Fixes#8650
* feat(changelog): add fragment for PR 11951
* fix(zypper_repository): allow state=absent when .repo URL/file is unreachable
When removing a repository by .repo URL, a download failure used to cause
an unconditional fail_json. Now, for state=absent, the module warns and
falls back to deriving the alias from the .repo filename basename.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(changelog): add fragment for PR 11947
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(xml): add huge_tree option to support large XML files
Add the huge_tree parameter (bool, default false) which passes huge_tree=True
to lxml's XMLParser, disabling libxml2's internal size restrictions on text
nodes and document depth.
Fixes#4897
* fix(xml): add changelog fragment for PR 11940
* feat(supervisorctl): use parallel bulk commands for name=all
When name=all, dispatch a single `supervisorctl start/stop/restart all`
instead of iterating per process, matching the CLI's parallel behaviour.
Also extract inline status-filter lambdas into named module-level functions.
Fixes#8159
* feat(changelog): add fragment for PR 11953
* lxc_container: use LVM runners from _lvm module utils
Replace direct run_command calls for lvs, vgdisplay, lvdisplay,
lvcreate, and lvremove with the shared CmdRunner-based runners from
module_utils/_lvm.py. Switches from human-readable text parsing to
machine-readable --noheadings/--nosuffix/--separator output.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* lxc_container: add changelog fragment for PR 11920
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* generate run_info information for commands
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* replace default favicon URL
* add changelog fragment for PR 11909
* fix syntax for change fragment
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* use higher res favicon by default
---------
Co-authored-by: Lars Krahl <lars.krahl@telekom.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
