* add monit version to successful exit
* install the standard monit - if 5.34, then bail out
* add 3sec wait after service restart
- that restart happens exactly before the task receiving the SIGTERM, so maybe, just maybe, it just needs time to get ready for the party
* wait for monit initialisation after restart
* monit tests: check service-specific status in readiness wait
The wait task was checking 'monit status' (general), but the actual
failing command is 'monit status -B httpd_echo' (service-specific).
This causes a race where general status succeeds but service queries
fail. Update to check the exact command format that will be used.
* monit tests: remove 5.34.x version restriction
The version restriction was based on incorrect diagnosis. The actual
issue was the readiness check validating general status instead of
service-specific queries. Now that we check the correct command
format, the tests should work across all monit versions.
* monit tests: add stabilization delay after readiness check
After the readiness check succeeds, add a 1-second pause before
running actual tests. Monit 5.34.x and 5.35 appear to have a
concurrency issue where rapid successive 'monit status -B' calls
can cause hangs even though the first call succeeds.
* monit tests: add retry logic for state changes to handle monit daemon hangs
Monit daemon has an intermittent concurrency bug across versions 5.27-5.35
where 'monit status -B' commands can hang (receiving SIGTERM) even after
the daemon has successfully responded to previous queries. This appears
to be a monit daemon issue, not a timing problem.
Add retry logic with 2-second delays to the state change task to work
around these intermittent hangs. Skip retries if the failure is not
SIGTERM (rc=-15) to avoid masking real errors.
* monit tests: capture and display monit.log for debugging
Add tasks in the always block to capture and display the monit log file.
This will help diagnose the intermittent hanging issues by showing what
monit daemon was doing when 'monit status -B' commands hang.
* monit tests: enable verbose logging (-v flag)
Modify the monit systemd service to start with -v flag for verbose
logging. This should provide more detailed information in the monit
log about what's happening when status commands hang.
* monit: add 0.5s delay after state change command
After extensive testing and analysis with verbose logging enabled, identified
that monit's HTTP interface can become temporarily unresponsive immediately
after processing state change commands (stop, start, restart, etc.).
This manifests as intermittent SIGTERM (rc=-15) failures when the module
calls 'monit status -B <service>' to verify the state change. The issue
affects all monit versions tested (5.27-5.35) and is intermittent, suggesting
a race condition or brief lock in monit's HTTP request handling.
Verbose logging confirmed:
- State change commands complete successfully
- HTTP server reports as 'started'
- But subsequent status checks can hang without any log entry
Adding a 0.5 second sleep after sending state change commands gives the
monit daemon time to fully process the command and become responsive again
before the first status verification check.
This complements the existing readiness check after daemon restart and
the retry logic for SIGTERM failures in the tests.
* tests(monit): remove workarounds after module race condition fix
After 10+ successful CI runs with no SIGTERM failures, removing test-level
workarounds that are now redundant due to the 0.5s delay fix in the module:
- Remove 1-second stabilization pause after daemon restart
The module's built-in 0.5s delay after state changes makes this unnecessary
- Remove retry logic for SIGTERM failures in state change tests
The race condition is now prevented at the module level
- Remove verbose logging setup and log capture
Verbose mode didn't log HTTP requests, so it didn't help diagnose the issue
and adds unnecessary overhead
Kept the readiness check with retries after daemon restart - still needed
to validate daemon is responsive after service restart (different scenario
than the state change race condition).
* restore tasks/main.yml
* monit tests: reduce readiness check retries from 60 to 10
After successful CI runs, observed that monit daemon becomes responsive
within 1-2 seconds after restart. The readiness check typically passes
on the first attempt.
Reducing from 60 retries (30s timeout) to 10 retries (5s timeout) is
more appropriate and allows tests to fail faster if something is
genuinely broken.
* add changelog frag
* Update changelogs/fragments/11255-monit-integrationtests.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix mistaken rebase
* plugins/modules/lxd_storage_: include error codes, clean up notes
* plugins/modules/lxd_storage_: snap_url, ruff fix
* plugins/modules/lxd_storage_volume_info.py: remove checks on expected api returned bits
* plugins/modules/lxd_storage_volume_info.py: required: true
* tests/integration/targets/lxd_storage_volume_info/tasks/main.yaml: add Test fetching specific volume by name
* tests/unit/plugins/modules/test_lxd_storage_: add unit tests
* tests/integration/targets/lxd_storage_pool_info/tasks/main.yaml: add integratio tests
* tests/integration/targets/lxd_storage_: not required
* tests/integration/targets/lxd_storage_: not required perhaps, lxd_project has them
* tests/unit/plugins/modules/test_lxd_storage_volume_info.py: fix python3.8 tests
* tests/unit/plugins/modules/test_lxd_storage_pool_info.py: fix python3.8
* tests/integration/targets/lxd_storage_: correct paths for aliases
* tests/unit/plugins/modules/test_lxd_storage_volume_info.py: remove backticks
* tests/unit/plugins/modules/test_lxd_storage_volume_info.py: remove blank line
* tests/unit/plugins/modules/test_lxd_storage_: python3.8 changes
* tests/unit/plugins/modules/test_lxd_storage_: python3.8 changes
* tests/unit/plugins/lookup/test_github_app_access_token.py: restore
* tests/unit/plugins/connection/test_wsl.py: restore
* plugins/modules/lxd_storage_: use ANSIBLE_LXD_DEFAULT_SNAP_URL and put API version into const
* lxd_storage_volume_info: use recursion to gather all volume details
* tests/integration/targets/lxd_storage_volume_info/tasks/main.yaml: fix silet skipped failures
* tests/integration/targets/lxd_storage_pool_info/tasks/main.yaml: fix silet failures
* lxd_storage_pool_info: update to use recursion to gather all details in one shot
* Remove unnecessary change.
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* locale_gen: search for available locales in /usr/local as well
* better var name
* add test for /usr/local
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* skip /usr/local/ for Archlinux
* improve/update documentation
* add license file for the custom locale
* add changelog frag
* Update plugins/modules/locale_gen.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/11046-locale-gen-usrlocal.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
kea_command: new module to access an ISC KEA server
This module can be used to access the JSON API of a
KEA DHCP4, DHCP6, DDNS or other services in a generic
way, without having to manually format the JSON, with
response error code checking.
It directly accesses the Unix Domain Socket API so it
needs to execute on the system the server is running,
with superuser privilegues, but without the hassle of
wrapping it into HTTPS and password auth (or client
certificates).
The integration test uses a predefined setup for
convenience, which runs on Debian trixie as well as,
on the CI, Ubuntu noble. It makes assumptions about
the default package configuration and paths and is
therefore tricky to run on other distros/OSes. This
only affects running the KEA server as part of the
tests, not the module.
* Adjust all __future__ imports:
for i in $(grep -REl "__future__.*absolute_import" plugins/ tests/); do
sed -e 's/from __future__ import .*/from __future__ import annotations/g' -i $i;
done
* Remove all UTF-8 encoding specifications for Python source files:
for i in $(grep -REl '[-][*]- coding: utf-8 -[*]-' plugins/ tests/); do
sed -e '/^# -\*- coding: utf-8 -\*-/d' -i $i;
done
* Remove __metaclass__ = type:
for i in $(grep -REl '__metaclass__ = type' plugins/ tests/); do
sed -e '/^__metaclass__ = type/d' -i $i;
done
* Bump version to 12.0.0.
* Remove deprecated modules and plugins.
* state is now required.
* Change default of prepend_hash from auto to never.
* Remove support for force=''.
* Always delegate 'debug'.
* Remove ignore_value_none and ctx_ignore_none parameters.
* Remove parameters on_success and on_failure.
* Update BOTMETA.
* Adjust docs reference.
* Forgot required=True.
* Fix changelog fragment.
* Adjust unit tests.
* Fix changelog.
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
---------
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* [doc] update requirements for consul_kv module
python-consul has been unmaintained for a while. It uses a legacy way of passing the Consul token when sending requests. This leads to warning messages in Consul log, and will eventually break communication. Using the maintained py-consul library ensures compatibility to newer Consul versions.
* [doc] replace all python-consul occurrences with py-consul
* [fix] tests and possible pip server errors
* [chore] remove referencce to python-consul in comment
---------
Co-authored-by: Sebastian Damm <sebastian.damm@pascom.net>
* Exclude aliases before comparison
* add test
* fragment
* Update changelogs/fragments/10829-fix-keycloak-role-changed-status.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Andre Desrosiers <andre.desrosiers@ssss.gouv.qc.ca>
Co-authored-by: Felix Fontein <felix@fontein.de>
* homebrew: Support old_tokens and oldnames in homebrew package data
Fixes#10804
Since brew info will accept old_tokens (for casks) and oldnames (for formulae) when provided by the homebrew module "name" argument, the module also needs to consider thes old names as valid for the given package. This commit updates _extract_package_name to do that.
All existing package name tests, including existing tests for name aliases and tap prefixing, have been consolidated with new name tests into package_names.yml.
* Added changelog fragment.
* homebrew: replace non-py2 compliant f-string usage
* code formatting lint, and py2 compatibility fixes
* homebrew: added licenses to new files, nox lint
* Update plugins/modules/homebrew.py
use str.format() instead of string addition
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update tests/integration/targets/homebrew/tasks/casks.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update tests/integration/targets/homebrew/tasks/package_names_item.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update tests/integration/targets/homebrew/tasks/formulae.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fixes for performance concerns on new homebrew tests.
1) tests for alternate package names are commented out in main.yml.
2) the "install via alternate name, uninstall via base name" test
case was deemed duplicative, and has been deleted .
3) minor fixes to use jinja2 "~" for string concat instead of "+"
* Fix nox lint
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
changed the dependency that is used to test the functionality in android_sdk module. The previous dependency was ~100MB, the current one is ~6MB. This should speed up the tests a bit and reduce the traffic.
* random_string: Specify seed while generating random string
* Allow user to specify seed to generate random string
Fixes: #5362
Signed-off-by: Abhijeet Kasurde <Akasurde@redhat.com>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Signed-off-by: Abhijeet Kasurde <Akasurde@redhat.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* first commit
* add and fixe test
* add example
* fragment and sanity
* sanity
* sanity
* Update plugins/modules/keycloak_identity_provider.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/10527-keycloak-idp-well-known-url-support.yml
---------
Co-authored-by: Andre Desrosiers <andre.desrosiers@ssss.gouv.qc.ca>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added lvm_pv_move_data module
* Removed trailing whitespace
* Decreased loop devices file size
* Remove test VG if exists
* Force remove test VG if exists
* Renamed test VG and LV names
* Updated assert conditions
* Added .ansible to .gitignore
* Force extending VG
* Wiping LVM metadata from PVs before creating VG
* Clean FS, LV, VG and PSs before run
* Migrated to CmdRunner
* Added more detailed info in case of failure and cosmetic changes
* Remove redundant params from CmdRunner call
* Updates the RETURN documentation block to properly specify the return type
of the 'actions' field:
- Changes return status from 'always' to 'success'
- Adds missing 'elements: str' type specification
* Extend list of type aliases for json_query.
* Improve tests.
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
---------
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
* sysrc: refactor
* sysrc: refactor changelog fragment
* sysrc: forgot the os import
* sysrc: update test to edit the correct file
* sysrc: Added copyright info to the test conf file
* sysrc: Added full copyright info to the test conf file
* sysrc: Detect permission denied when using sysrc
* sysrc: Fixed the permission check and 2.7 compatibility
* sysrc: Fix typo of import
* sysrc: Fix err.find check
* sysrc: Add bugfixes changelog fragment
* sysrc: Use `StateModuleHelper`
* sysrc: updated imports
* sysrc: remove re import and set errno.EACCES on the OSError
* sysrc: format code properly
* sysrc: fix Python 2.7 compatibility and set changed manually
* sysrc: add missing name format check
Also use `self.module.fail_json` through out
* sysrc: Removed os import by accident
* sysrc: updated per review, and the way the existing value is retrieved
